BOSTONtec Adjustable Workstation

BOSTONtec Manual Height Adjustable Workstation, 30" D X 60" W, 500 Lb. Capacity

AF-assembly_Large_Final
Enlarge
  • AF-Caster_Final
  • AF-assembly_Large_Final
  • This frame has been designed with sufficient strength and stability to support a variety of tasks in a broad range of environments. Height adjustments are made by removing the locking hand screw, repositioning the telescoping leg to the desired height and replacing the locking hand screw. This frame is best for single shift, single operator applications where frequent height changes are not required. A rear fixing frame provides stable support for uprights to hold bin rails, shelving, articulating modules, and lighting. Drawers are also available.

    The work surface is constructed of high density particleboard and laminated with a 1/16” layer of standard plastic laminate. All four sides are edged with an incredibly durable, high impact resistant 3 mm thick PVC edging in gray to match the workstation frame. All four corners and the top and bottom edge are finished with a 2mm radius.

    Features:
    • Manually adjustable base frames are recommended for single-shift, single operator applications.
    • Cantilevered style leg.
    • Seated to standing operator adjustability from the fifth to 95th percentile operator height (28.25” to 40.25” with work surface).
    • Strong open deck frame easily accepts tilting work surfaces.
    • 500 pound load capacity
    • Designed to meet ANSI/HSF 100-1988.
    • Generous under table leg room helps with ADA compliance
    • Frame uses BOSTONtec 5” height and 4”diameter wheel casters- 2 swivel and 2 locking.
    • Finished with gray epoxy powder coat.
    • 5 year limited warranty
    • For quantities great than five, lead times may vary
    • Consult factory for customs
    Improving Productivity through Ergonomic Solutions: BOSTONtec height adjustable workstations allow users to configure their work area to minimize risk of injury and maximize productivity. Workstations may be set to the optimum height for each worker regardless of their height and are accompanied by a wide variety of ergonomically designed accessories providing maximum flexibility in work flow design for picking and packing or assembly operations.
  • Workstation Base Frame Manual Cantilevered
    Depth 30 in
    Width 60 in
    Capacity (lbs) 500 lbs
    Work Surface 3 MM Plastic Laminate
    Feet and Casters 5" Casters-2 Swivel and 2 Locking
    Surface Height Min 28.25 in
    Surface Height Max 30.25 in
    Product Weight (lbs.) 278 lbs
    Type Workstation
  • All standard products manufactured by BOSTONtec, Inc. carry a five (5) year guarantee and Limited Warranty from the date of substantial completion to the original owner against defective material and workmanship. This is a warranty of replacement and repair only, whereby BOSTONtec, Inc. will correct defects in material and/or workmanship without charge.

    BOSTONtec, Inc. specifically does not warrant any product or hardware that has been incorrectly installed, exposed to excessive loads, abused, or was not manufactured by BOSTONtec, Inc.

    To enforce your rights under this warranty, you must give written notice to BOSTONtec, Inc. within thirty (30) days of the date of discovery of the defect. The address of BOSTONtec, Inc. for receipt of notices is as follows:

    BOSTONtec, Inc.
    2700 James Savage
    Midland, Michigan 48642
    Fx. (989) 496-9927

    IN NO EVENT SHALL BOSTONTEC, INC. BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE, INSTALLATION,PERFORMANCE OR FAILURE OF ITS PRODUCTS OR OF ANY OF THE HARDWARE CONTAINED IN OR ON ITS PRODUCTS.

    THIS EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BOSTONTEC, INC. WITH RESPECT TO THE REPLACEMENT AND/OR REPAIR OF ANY TABLE, ACCESSORY OR HARDWARE.

    ALL WARRANTIES IMPLIED BY LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY WAIVED AND DISCLAIMED.

    PRODUCTS PURCHASED BY BOSTONtec, SUCH AS WORK SURFACES, CASTERS, MOTORS AND ELECTRICAL FIXTURES ARE COVERED BY THEIR MANUFACTURER’S WARRANTIES.
  •  
     
     
    1000 characters left
    Spell Check
     
    This item currently has no reviews. Be the first to review this item!
Brand: BOSTONtec
Model Number: AF3060-FD30A-3M3060
BOSTONtec Manual Height Adjustable Workstation, 30" D X 60" W, 500 Lb. Capacity, Laminate Work Surface, 5" Casters-2 Swivel and 2 Locking

Choose Your Quantity

Shipping Estimate

Shipping Weight: 278 lbs.

Lead Time to Ship: Contact us for options.

Shipping and Handling Destination: Shipping and handling estimate calculation is for continental United States of America. If shipping outside of the continental United States of America, shipping and handling will be calculated and totalled upon final invoice.

Please tell us about your application, details of products being handled by this equipment. (max product size, min product size, other questions and make recommendations)
 
255 characters left
Spell Check
-or-
Brand: BOSTONtec
Model Number: AF3060-FD30A-3M3060
Bastian Solution accepts the following forms of payments: Payment types
-or-
Close