BOSTONtec Heavy Duty Electric Height Adjustable Workstation, 30" D X 60" W, 1,200 Lb. Capacity

Ergonomic, electric adjustable frame is designed to support heavy duty tasks for fifth to 95th percentile height operators in either a seated or standing position. Work surface height is operator adjustable at the touch of a button. A rear fixing frame provides stable support for double bay uprights to hold bin rails, shelving, articulating modules and lighting. Drawers are also available. Great solution for multi user or multiple shift operations.

The work surface is constructed of high density particleboard and laminated with a 1/16” layer of standard plastic laminate. All four sides are edged with an incredibly durable, high impact resistant 3 mm thick PVC edging in gray to match the workstation frame. All four corners and the top and bottom edge are finished with a 2mm radius.

Features:

• Cantilevered style leg insures ample leg room
• Seated to standing operator adjustability from the fifth to 95th percentile operator height (30” to 45.9” with work surface).
• Frame accepts up to 1,200 pounds of uniformly distributed weight
• Dual synchronized linear actuators with integral limit switches, 24 VDC low voltage control, UL, CSA, 120 VAC, 1.6A
• Designed to meet ANSI/HSF 100-1988.
• Effortless operation and generous under table leg room helps with ADA compliance
• Frame accepts BOSTONtec leveler glide feet for PBH heavy duty series.
• Finished with gray epoxy powder coat.
• 5 year limited warranty
• For quantities great than five, lead times may vary

Improving Productivity through Ergonomic Solutions: BOSTONtec height adjustable workstations allow users to configure their work area to minimize risk of injury and maximize productivity. Workstations may be set to the optimum height for each worker regardless of their height and are accompanied by a wide variety of ergonomically designed accessories providing maximum flexibility in work flow design for picking and packing or assembly operations.

Workstation Base Frame	Power Heavy Duty Cantilevered
Depth	30 in
Width	60 in
Capacity (lbs)	1200 lbs
Work Surface	3 MM Plastic Laminate
Feet and Casters	Leveler Glide Feet
Surface Height Min	30 in
Surface Height Max	45.9 in
Product Weight (lbs.)	315 lbs
Type	Workstation

All standard products manufactured by BOSTONtec, Inc. carry a five (5) year guarantee and Limited Warranty from the date of substantial completion to the original owner against defective material and workmanship. This is a warranty of replacement and repair only, whereby BOSTONtec, Inc. will correct defects in material and/or workmanship without charge.

BOSTONtec, Inc. specifically does not warrant any product or hardware that has been incorrectly installed, exposed to excessive loads, abused, or was not manufactured by BOSTONtec, Inc.

To enforce your rights under this warranty, you must give written notice to BOSTONtec, Inc. within thirty (30) days of the date of discovery of the defect. The address of BOSTONtec, Inc. for receipt of notices is as follows:

BOSTONtec, Inc.
2700 James Savage
Midland, Michigan 48642
Fx. (989) 496-9927

IN NO EVENT SHALL BOSTONTEC, INC. BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE, INSTALLATION,PERFORMANCE OR FAILURE OF ITS PRODUCTS OR OF ANY OF THE HARDWARE CONTAINED IN OR ON ITS PRODUCTS.

THIS EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BOSTONTEC, INC. WITH RESPECT TO THE REPLACEMENT AND/OR REPAIR OF ANY TABLE, ACCESSORY OR HARDWARE.

ALL WARRANTIES IMPLIED BY LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY WAIVED AND DISCLAIMED.

PRODUCTS PURCHASED BY BOSTONtec, SUCH AS WORK SURFACES, CASTERS, MOTORS AND ELECTRICAL FIXTURES ARE COVERED BY THEIR MANUFACTURER’S WARRANTIES.